Greene County
Greene County is classified by the EPA’s 1993 Map of Radon Zones as Zone 2, indicating moderate radon potential. The predicted average indoor radon screening level is between 2 and 4 pCi/L. While below the EPA action level, many individual homes in Zone 2 areas test above 4 pCi/L. The EPA recommends testing all homes regardless of zone.
Measured in Virginia Homes
The Virginia Department of Health collected 121 radon test results from homes in Greene County between 2016 and 2024, counting only the first test on the lowest lived-in floor. Their average was 3.5 pCi/L; individual results ran from 0.3 to 36.6 pCi/L. That matches the band its EPA zone predicted (Moderate).
The EPA zone above comes from a 1993 map built mostly from geology and the limited test data available then. VDH’s figures are actual test results reported by radon test kit vendors. VDH cautions that its averages should not be used to predict radon in any single home — the only way to know your home’s level is to test it.
Source: Virginia Department of Health, Office of Radiological Health, Radon Program — Virginia Radon Test Results map · data.
Greene County falls into EPA Radon Zone 2, indicating moderate radon potential with predicted indoor screening levels between 2 and 4 pCi/L. It is one of 28 Zone 2 counties in Virginia (21% of the state's 136 counties). That is a predicted screening level from the EPA's 1993 map, not a measured average, and many individual homes in Zone 2 areas still test above it. Factors like foundation type, soil conditions, and ventilation can push radon levels higher in specific homes.
Test for radon in Greene County
EPA Zone 2 means moderate radon potential (2-4 pCi/L predicted average). The EPA recommends testing every home; many individual Zone 2 homes test above 4 pCi/L.
As an Amazon Associate we earn from qualifying purchases — clicks help keep this lookup free.
What This Means for Greene County
Should You Test?
Yes. While Zone 2 has moderate predicted levels, many individual homes still test above 4 pCi/L. Home-specific factors like foundation type, soil permeability, and ventilation matter as much as the zone classification. A $15–$30 short-term test kit is the easiest way to find out.
Real Estate
Consider requesting a radon test during the home inspection process. If levels are elevated, mitigation systems are effective and relatively affordable.
New Construction
Radon-resistant new construction (RRNC) is recommended for new homes in Zone 1 and Zone 2 areas, so if you are building here, ask your builder to include it. These features add $350–$500 to construction costs and include a sub-slab gas collection layer, vapor barrier, sealed cracks, and a vent pipe to the roof. Much cheaper to install during construction than to retrofit.